Naar inhoud
Menu +31 (0) 316 740 856 [javascript protected email address] Route Search
English
Sliders Blog Oil Pressure

What is low oil pressure and how to solve it?


The engine oil in your engine makes sure that all moving parts within an engine are lubricated and protected. When the oil is flowing through the openings within the engine, pressure is build up. This pressure makes sure that the oil reaches all parts and corners of the engine. If this would not happen, like in the case of low oil pressure, it could cause metal parts to come into contact with each other which leads to friction and deterioration. In the worst case your entire engine could break down and would need to be replaced. That is why it is very important that your engine has the right amount of oil pressure. Oil pressure is measured in PSI and the perfect amount of oil pressure varies depending on what brand and model car you own. In general, if the pressure is below 20 PSI or under the normal range on the gauge it requires your immediate attention. This is also the case when your oil pressure light is coming on. Not diagnosing and treating the problem could lead to serious damage and high repair costs. Your oil pressure light could come on because of several reasons. In this blog we will discuss the causes of low oil pressure. 
Facebook_Image_Blog_Oil_Pressure.jpg

What are low oil pressure causes?

  • Obstructed Oil Filter: After the oil leaves the oil pump, it passes through the oil filter. This filter prevents debris and other contaminants from passing through the engine and keeps it clean. This filter naturally creates a resistance in the oil flow but is not disruptive. As the build-up of debris grows, the restriction of the oil flow will increase. This could result in a completely blocked oil filter through which no oil can pass. To prevent a blockage, the pressure relief valve will open. This valve opens automatically when the pressure exceeds a preset value. The oil will then bypass the oil filter so it can keep on flowing. This detour reduces the pressure to that of the bypass valve. 
  • Low Oil Level: When the oil level is low, the oil pump can draw up air from the sump. This can cause the oil to become aerated and turn into foam. Foaming can lead to excessive oxidation and reduces the lubricating properties of the oil. With an insufficient amount of oil, the oil pump will not be able to generate enough pressure. This low oil pressure could also be fluctuating during high-speed turns. During these turns, the oil will move to the side of the sump, away from the oil pump. 
  • Dirty Oil Pump: The oil pump takes the oil from the bottom of the oil pan and circulates the oil under pressure to the bearings, pistons and camshaft of the engine. If there is dirt in the pickup, a filter will prevent this from going into the oil pump. If the filter is full with debris, it may have to be cleaned before enough oil can pass through it. There could also be excessive clearances inside the oil pump. This will reduce the ability to pump efficiently and reduces therefore the flow and pressure. This can happen because the oil pump is the only component within the engine that is lubricated with unfiltered oil due to the fact that the oil filter is situated after the oil pump. If there seems to be no problem with the oil pickup filter, it could be that your oil pump is damaged. 
  • Worn Engine Bearings: Oil pressure is not created by the oil pump itself but through the flow and resistance that flow produces. This resistance is accumulated by the openings in the engine through which the oil flows and through the amount of clearance there is between the bearings and crankshaft journals. Especially in a high mileage engine, these bearings will wear down causing the amount of clearance to increase. Due to this increased clearance, the flow will increase and therefore decrease the pressure. These increased bearing clearances will also be noticed by an increase in engine noise and pounding. If there are increased clearances in other places in the engine, this could also lead to reduced oil pressure. 
  • Weak or leaky oil pressure relief valve: The pressure relief valve helps regulating oil pressure and protects your engine from getting damaged by high oil pressure. Normally, the valve opens automatically when it exceeds a preset value. If debris gets stuck, it could be that the valve is held open. This will reduce the oil pressure. 
  • Oil Viscosity: A low viscosity oil flows more easily through the engine than a high viscosity oil. This is because a low viscosity oil generates less resistance which results in low oil pressure. Temperatures impact the viscosity of the oil. If you are using a mono-grade oil it is important to choose the grade depending on the temperatures outside. That means that if you are using high viscosity oil in summer, you can better switch to a lower viscosity in winter to avoid an oil that is too thick to flow easily. The same applies when you are using a low viscosity oil in winter, you can better switch to a higher viscosity oil in the summer so that more resistance is generated. If you are using a multi-grade oil, your oil will be suitable for all seasons and doesn’t require a change depending on the temperatures. For choosing the right type of grade, always follow the manufacturer’s advice. 

Oil Advisor

For what kind of vehicle do you need lubricants?

Equivalent Finder

For what kind of brand do you need an equivalent?
Search

Specification Finder

What kind of specification are your looking for?
Search
Copyright © 2020 Rymax Lubricants
    Close

    Cookie-settings

    Rymax Lubricants uses cookies to ensure an optimal userexperience.

    We would like to ask your permission to place cookies.

    More information.

    Accept Decline