Naar inhoud
Menu +31 (0) 316 740 856 [javascript protected email address] Route Search
English
Headerimage

Vector 4

Hydraulic brake fluid DOT 4

Vector 4

Specifications

  • DOT 4
  • SAE J1703
  • SAE J1704
  • ISO 4925
  • US FMVSS 116 Dot 4

Segments

Passenger Car, Commercial Transport, Motorcycle, Racing, Agriculture, Mining

Download MSDS Download TDS

Benefits

  • Our Brake Fluid DOT 4 is a high performance brake and clutch fluid with a minimum boiling point of 260°C.

Description

Our Brake Fluid DOT 4 is a high performance brake and clutch fluid with a minimum boiling point of 260°C , exceeding SAE J1704 and meeting or exceeding United States Federal Motor Vehicle Safety Standard No. 116 DOT 4 specifications. Our Brake Fluid DOT 4 provides excellent corrosion protection and rubber seal compatibility.

Rymax Brake Fluids are completely miscible with one another and are compatible with other approved DOT glycol ether and borate brake fluids. However, do not mix with silicone type or silicate ester type brake fluids. Good brake fluid quality is essential for the system to operate under severe conditions. In service, the brake fluid absorbs moisture which causes a significant reduction in the boiling point of the brake fluid. A consequent risk of this is so-called “vapour lock”.

Vector DOT 4 exceeds the international standards specifying minimum values for the wet and dry boiling point. In doing so, we offer a substantial safety margin against water pick up.

Available in

  • 0.25L
  • 0.3L
  • 0.4L
  • 0.5L
  • 1L
  • 4L
  • 5L
  • 20L
  • 205L
  • 1000L
  • 0.4kgs
  • 18kgs
  • 185kgs

Oil Advisor

For what kind of vehicle do you need lubricants?

Equivalent Finder

For what kind of brand do you need an equivalent?
Search

Specification Finder

What kind of specification are your looking for?
Search
Copyright © 2018 Rymax Lubricants
    Close